Field Emission Scanning Electron Microscopy Research Articles

Nanoarchitectonics of aptamer-based electrochemical biosensor utilizing electerospun carbon nanofibers and gold nanoparticles for Acinetobacter baumannii detection

Acinetobacter baumannii (A. baumannii) is a gram-negative bacterium that is responsible for causing a range of infections, including pneumonia, meningitis, and bloodstream infections and the detection of this bacterium is crucial for timely diagnosis and treatment of infections. The purpose of this work was to design and manufacture an electrochemical biosensor based on carbon nanofibers (CNFs), gold nanoparticles (AuNPs), and aptamer that could detect A. baumannii in urine samples. At first, polyacrylonitrile (PAN) polymer was electrospun and CNFs were formed during two stages of heat treatment including stabilization and carbonization, and Raman spectroscopy and X-ray diffraction (XRD) were used to characterize it. Then, these CNFs were used to modify the surface of the screen-printed carbon electrode (SPCE), and AuNPs were placed on the SPCE modified with CNFs using the electrodeposition method. Field emission scanning electron microscopy (FESEM) and energy dispersive X-Ray spectroscopy (EDS) were used to study the surface morphology of the modified electrode to determine the carbon and gold elements, respectively. Then the aptamer related to A. baumannii was placed on this modified electrode using a simple and cost-effective process and characterized by the cyclic voltammetry (CV) technique. Next, the spiked A. baumannii in urine samples was detected by this aptasensor in the range of 101 to 106 cfu mL−1 and limit of detection (LOD) to 0.681 cfu mL−1 and limit of quantitation (LOQ) to 2.27 cfu mL−1 with differential pulse voltammetry (DPV) technique. Salmonella typhimurium, Staphylococcus aureus and E. Coli were used to perform the selectivity test. In addition, its repeatability was checked and its stability for 30 days was more than 96 %. Finally, the results of this aptasensor were compared with the conventional method of bacterial culture, and this aptasensor was able to detect A. baumannii in a less time and with more sensitivity.

Green synthesis of silver nanoparticles from Hibiscus tiliaceus L. Leaves and their applications in dye degradation, antioxidant, antimicrobial, and anticancer activities

The present study reports the green synthesis of silver nanoparticles (AgNPs) from aqueous extract of Hibiscus tiliaceus L. leaves and their application in dye degradation, antioxidant, antimicrobial, and anticancer activities. Analysis using Fourier transform infrared (FT-IR) spectroscopy revealed that plant metabolite functional groups had a role in the reduction and stability of AgNPs, and X-ray crystallography (XRD) demonstrated that the AgNPs were in crystal form. The UV–vis spectroscopy, dynamic light scattering (DLS), and zeta potential investigations revealed that the AgNPs were formed with an average size of 88.10 nm in colloidal form and were stable (-49 mV). The field emission scanning electron microscopy (FE-SEM) and high-resolution transmission electron microscopy (HR-TEM) confirmed the shape and size of the AgNPs as spherical with a particle size of 30 - 35 nm, respectively. The AgNPs exhibited potential antioxidant activity by total antioxidant, DPPH, and reducing power assays. The biosynthesized AgNPs displayed a wide range of antibacterial activity on Gram-ve and Gram+ve bacteria by the zone of inhibition assay. AgNPs showed good anticancer activity on MCF-7 cells with an IC50 value of 65.83 µg/mL. Furthermore, AgNPs acted as potential catalysts in combination with the reducing agent sodium borohydride (NaBH4) for the degradation of methylene blue (MB), methylene orange (MO), and methylene green (MG) dyes. The degradation efficiency of catalyst AgNPs in the attendance of NaBH4 for 15 min was noted to be 12.8 %, 26.92 %, and 47.56 % for MO, MB, and MG, respectively. The study concluded that green synthesized AgNPs could be highly applicable as an antioxidant, antimicrobial, and anticancer agents in the biomedical field. Furthermore, AgNPs could be helpful in the remediation of dye effluents.

Assessment of the efficiency and stability of enzymatic membrane reaction utilizing lipase covalently immobilized on a functionalized hybrid membrane

Enzyme immobilization in membrane bioreactors has been considered as a practical approach to enhance the stability, reusability, and efficiency of enzymes. In this particular study, a new type of hybrid membrane reactor was created through the phase inversion method, utilizing hybrid of graphene oxide nanosheets (GON) and polyether sulfone (PES) in order to covalently immobilize the Candida rugosa lipase (CRL). The surface of hybrid membrane was initially modified by (3-Aminopropyl) triethoxysilane (APTES), before the use of glutaraldehyde (GLU), as a linker, through the imine bonds. The resulted enzymatic hybrid membrane reactors (EHMRs) were then thoroughly analyzed by using field-emission scanning electron microscopy (FE-SEM), contact angle goniometry, surface free energy analysis, X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy, attenuated total reflection (ATR), and energy-dispersive X-ray (EDX) spectroscopy. The study also looked into the impact of factors such as initial CRL concentration, storage conditions, and immobilization time on the EHMR's performance and activity, which were subsequently optimized. The results demonstrated that the CRLs covalently immobilized on the EHMRs displayed enhanced pH and thermal stability compared to those physically immobilized or free. These covalently immobilized CRLs could maintain over 60% of their activity even after 6 reaction cycles spanning 50 days. EHMRs are valuable biocatalysts in developing various industrial, environmental, and analytical processes.

Precursor-concentration-controlled Morphology of TiO2 Nanorod/Nanoflower Films for Enhanced Photoelectrochemical Water Splitting and Investigating Their Growth Mechanism

Titanium dioxide (TiO2) has been considered as one of the most promising photocatalysts for photoelectrochemical (PEC) water splitting. Therefore, numerous efforts have been devoted to improving its PEC water splitting performance. In this study, TiO2 nanorod/nanoflower (NRF) films with controlled morphology were synthesized on fluorine-doped tin oxide (FTO) glass substrates by following a facile one-step hydrothermal method. The TiO2 NRF films were characterized by X-ray diffraction (XRD), Raman spectroscopy, field emission scanning electron microscopy (FE-SEM), atomic force microscopy (AFM), energy-dispersive X-ray spectrometer (EDS), and ultraviolet-visible (UV-Vis) spectrophotometer. FE-SEM showed that the TiO2 films are composed of a simultaneous growth of a primary layer of TiO2 nanorod arrays (NRAs) and a second layer of TiO2 nanoflowers (NFs). The proposed growth mechanism highlighted the influence of precursor concentration on nucleation sites, affecting the preferred crystallographic plane growth of rutile TiO2 and nanorod alignment on the FTO substrate. Intriguingly, TiO2 NRF films prepared with 1.0 mL of titanium butoxide exhibited a maximum photocurrent density of 3.58 mA.cm−2 at 1.23 V versus (vs.) the reversible hydrogen electrode (RHE), along with a maximum photoconversion efficiency of 0.69%. The enhanced photocurrent density and photoconversion efficiency were attributed to the optimum thickness in the range of 4.52-7.31 µm, which caused the film to be formed with a unique morphology of the primary layer with well-vertically aligned nanorods and the second layer of flowers consisting of numerous rods stacked on top of one another. This study demonstrates the importance of designing semiconductors with 1D nanorod/3D nanoflower structures as high-performance photoelectrodes for PEC water splitting. Copyright © 2024 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0).

Study of AlN Epitaxial Growth on Si (111) Substrate Using Pulsed Metal–Organic Chemical Vapour Deposition

A dense and smooth aluminium nitride thin film grown on a silicon (111) substrates using pulsed metal–organic chemical vapor deposition is presented. The influence of the pulsed cycle numbers on the surface morphology and crystalline quality of the aluminium nitride films are discussed in detail. It was found that 70 cycle numbers produced the most optimized aluminium nitride films. Field emission scanning electron microscopy and atomic force microscopy images show a dense and smooth morphology with a root-mean-square-roughness of 2.13 nm. The narrowest FWHM of the X-ray rocking curve for the AlN 0002 and 10–12 reflections are 2756 arcsec and 3450 arcsec, respectively. Furthermore, reciprocal space mapping reveals an in-plane tensile strain of 0.28%, which was induced by the heteroepitaxial growth on the silicon (111) substrate. This work provides an alternative approach to grow aluminium nitride for possible application in optoelectronic and power devices.

Thermal properties analysis and thermal cycling of HITEC molten salt with h-BN nanoparticles for CSP thermal energy storage applications.

Molten salts are the operational fluid for most concentrated solar power (CSP) systems, which has attracted more attention among the scientific community due to the augmentation of their properties with the doping of nanoparticles. Hexagonal boron nitride (h-BN) nanoparticles were dispersed in HITEC molten salt to create a novel nanofluid and evaluate the h-BN nanoparticles' influence on HITEC thermophysical properties. The influence of nanoparticle concentration (0.1, 0.5, and 1wt.%) of h-BN and HITEC was studied in this research. HITEC and nano-enhanced HITEC molten salt (NEHMS) were characterized using energy-dispersive X-ray spectroscopy (EDX), field emission scanning electron microscopy (FESEM), and Fourier transform infrared spectroscopy (FT-IR). Specific heat capacity, latent heat, and melting temperature were assessed using differential scanning calorimetry (DSC). The maximum working temperature was evaluated with thermogravimetric analysis (TGA). The ideal nanoparticle concentration is 0.1 wt.% h-BN, which results in a 27% increase in heat capacity, a 72% increase in latent heat, and a 7% enhancement in thermal stability. The thermal cycling stability test proved the stability of the enhanced thermophysical properties. The material characterization revealed that the samples with improved thermophysical properties have a homogeneous dispersion of nanoparticles with minor nanoparticle agglomeration. The system advisor model (SAM) simulation comparison of the optimum sample with solar salt and HITEC salt revealed that using the optimum sample increases CSP plant efficiency by 0.4% and reduces power costs by 0.13¢/kWh.

Phytonano silver for cosmetic formulation- synthesis, characterization, and assessment of antimicrobial and antityrosinase potential.

Novel formulations of silver nanoparticles remain exciting if it is applicable for cosmetic purposes. This study proposes a value-added brand-new nanomaterial for improving skin complexion by inhibiting melanin development. This work aims to develop cost effective, efficient, natural silver nanoparticles phytomediated by aqueous extract of leaf sheath scales of Cocos nucifera (Cn-AgNPs) having potential as tyrosinase inhibitors hindering melanin synthesis. The formation of Cn-AgNPs was assessed spectrophotometrically and confirmed by the sharp SPR spectrum at 425nm. The chemical composition profiling was characterized by X-ray diffraction (XRD) and Fourier Transform Infrared (FTIR) spectroscopy. The morphology was confirmed by Field Emission Scanning Electron Microscopy (FESEM) and the thermal stability was assessed by Thermogravimetric analysis (TGA). Pharmacological application studies supported the materialization of Cn-AgNPs with significant antityrosinase potential and considerably improved antibacterial and antioxidant properties. Cn-AgNPs showed potential antibacterial effects against gram-positive and negative strains, including prominent infectious agents of the skin. Antioxidant capacity was confirmed with an IC50 of 57.8μg/mL by DPPH radical scavenging assay. Furthermore, in vitro melanin content determination was performed using SK-MEL cells. Cell line studies proved that Cn-AgNPs decrease the melanin content of cells. The IC50 value obtained was 84.82μg/mL. Hence Cn-AgNPs is proposed to be acting as a whitening agent through lessening cellular melanin content and as a significant inhibitor of tyrosinase activity. The antioxidant properties and antibacterial effects can contribute to skin rejuvenation and can prevent skin infections as well. This evidence proposes the development of a new nanostructured pharmaceutical and cosmetic formulation from Cocos nucifera leaf sheath scales.

Polymer Supported Nitrogen-Bridged Symmetrical Binuclear Dioxidomolybdenum(VI) Complexes and Their Homogeneous Analogues as Potential Catalysts for Efficient Synthesis of 2-Amino-3-Cyano-4H-Chromenes/Pyrans.

Reaction of 2-chloromethyl-1H-benzimidazole with known intermediates (i-iii), prepared from diaminoguanidine hydrochloride with salicylaldehyde, 5-bromosalicylaldehyde or 3,5-di-tert-butylsalicylaldehyde, in the presence of triethylamine (NEt3) led to the formation of benzimidazole appended new ligands, H4L1-H4L3 (I-III). The homogeneous nitrogen-bridged symmetrical binuclear complexes, [(MoVIO2)2(L1)(H2O)2] (1), [(MoVIO2)2(L2)(H2O)2] (2) and [(MoVIO2)2(L3)(MeOH)2] (3) have been isolated by reacting these ligands with [MoVIO2(acac)2] in a 1 : 2 molar ratio in refluxing methanol. Using 1 : 1 (ligand to Mo precursor) molar ratio under above reaction conditions resulted in the corresponding mononuclear complexes, [MoVIO2(H2L1)(MeOH)] (4), [MoVIO2(H2L2)(H2O)] (5) and [MoVIO2(H2L3)(MeOH)] (6). The binuclear heterogeneous compounds [(MoVIO2)2(L1)(DMF)2]@PS (PS-1), [(MoVIO2)2(L2)(DMF)2]@PS (PS-2) and [(MoVIO2)2(L3)(DMF)2]@PS (PS-3) have been obtained by immobilization of 1-3 onto chloromethylated polystyrene (PS) beads. All synthesized ligands, homogeneous as well as supported compounds have been characterized by elemental analyses and various spectroscopic methods. Single crystal X-ray diffraction study of complexes 1 and 3 confirms their nitrogen-bridged symmetrical binuclear structures while 4 is mononuclear. Heterogeneous compounds (PS-1-PS-3) have further been studied by microwave plasma atomic emission spectroscopy, X-ray photoelectron spectroscopy, and field emission scanning electron microscopy along with energy dispersive spectroscopy. These compounds (homogeneous and heterogeneous) were explored for catalytic applications to one-pot multicomponent reactions (MCRs) for efficient synthesis of biologically active 2-amino-3-cyano-4H-chromenes/pyrans (21 examples). Optimising various reaction parameters helped in achieving as high as 97 % yields of products. Though, only half equivalent of the binuclear complexes (1-3) was required compared to mononuclear analogues (4-6) to achieve comparable yields, heterogeneous catalysts have an added advantage due to their stability and recyclability. Suitable reaction mechanism has also been proposed based on isolated intermediates.

Experimental Investigation of Date seed and Neem Powder Reinforced Natural Fiber Composites

Natural fillers have received great attention among researchers due their its light weight, high strength, degradability, and eco-friendly behavior. This work is focused on developing a laminate of date palm seed powder and neem gum powder reinforced epoxy resin. Epoxy resin is an excellent thermoset polymer with anoutstanding cost to performance ratio. Date palm seeds have highly competitive properties in improving the mechanical and thermal properties of composites by their good adherence to polymer matrix. Neem gum powder is used as a binder in increasing ratios of 0 %, 10 %, 15 %, 20 %, 25 %, and 30 % to test their strength in different compositions. Date seed powder has been reinforced in decreasing weight percent as 30 %, 25 %, 20 %, 15 %, 10 %, 5 %, and 0 %. The specimens prepared through the compression moulding technique were subjected to various mechanical tests like a tensile test, flexural test, and impact test as per the ASTM standards. Fractography analysis using FESEM (Field Emission Scanning Electron Microscopy) and FT-IR(Fourier Transform Infrared spectroscopy) test have determined the surface characteristics and chemical composition of the samples. The result shows that, by adding neem gum powder in increasing quantities the mechanical properties like tensile and flexural decreases. However, it does not affect the impact strength of the material. A detailed study of their behavior is discussed in this work.

Biogas purification by CO2 removal using facilitated transport mechanism of cellulose nanocrystals/polyvinyl alcohol layered hollow fiber membranes

AbstractBiogas can be a viable solution for replacing the conventional fuel for reducing pollution. However, the high CO2 content in biogas must be removed for its utilization. In this study, biogas purification is carried out employing cellulose nanocrystals (CNC)/polyvinyl alcohol (PVA) “selective layered” polysulfone hollow fiber membrane. The membrane chamber is designed such that the cross‐flow of the biogas can be ensured for the effective interaction of the biogas with membrane surface. From various characterization tools like field emission scanning electron microscope, FTIR, X‐ray diffraction, moisture absorption and tensile test, CNC1/PVA (1 wt% of CNC in PVA) nanocomposite film demonstrated optimum crystallinity and mechanical strength while retaining higher moisture absorption. The average selective layer thickness at this CNC concentration is 1169 nm. CO2 permeability of 17,858 barrer and the selectivity of 19 for CO2 over CH4 is observed, respectively.

Structural simulation and performance evaluation of a novel synthesized ZIF in the adsorption of MO from aqueous solutions.

Zeolitic imidazolate frameworks (ZIFs) are desirable materials widely applied as adsorbent for wastewater treatment. This study synthesizes and applies a novel structured ZIF with organic ligand of 2-methyl imidazole and metal salt of copper (II) sulfate as adsorbent. Its morphology and structure were investigated using Fourier transform infrared spectroscopy, X-ray diffraction, scanning electron microscope, field emission scanning electron microscope, energy dispersive X-ray spectrometry, and mapping analysis. After structural analysis, the adsorbent structure was simulated and determined using Avogadro and Gaussian software. The removal efficiency of prepared ZIF in the removal of methyl orange from aqueous solution was evaluated. The effect of pH, the concentration of the dye in solution, dosage of the adsorbent, and the contact time between adsorbent and solution on the methyl orange removal were examined using central composite design of response surface methodology in five levels. The maximum dye removal of 99% was obtained for 2g adsorbent/L, pH of 3.3, and initial dye concentration of 121mg/L after 127min contact time. In addition, to reduce the economic costs and energy consumption, the synthesis time was also reduced and used to show the applicability of the adsorbent prepared and understand its advantages and disadvantages in removing methyl orange dye from aqueous solutions. This molecular adsorbent is stable, and it can be stored for months. On the other hand, this ZIF can be easily recovered and reused many times. In this research, after five times of recovery, there was no significant change in the effectiveness of the adsorbent.

Enhanced DSSC efficiency through integration of red-emitting MgAl2O4: Eu3+ phosphor within TiO2 layer

The main objective of this paper was to enhance the absorption and charge carrier generation rates of DSSC. The functional property of the Eu3+ ion (red light) when infused with the MgAl2O4 host was combined with TiO2 nanoparticles and the results obtained through various studies are elaborated. The host and the nanoparticles were prepared through solid-state and sol-gel routes, respectively, with their crystalline structure and surface morphology identified by X-ray diffraction and field emission scanning electron microscope. The optical characteristics of the sample were studied through photoluminescence (PL) excitation (394 nm) and PL emission spectral analysis. The MgAl2O4: Eu3+ phosphor utilized in DSSC for the light down-conversion process converts high-energy incident light into low-radiation light, which further excites the N719 dye to emit charge carriers, thus increasing the conversion efficiency of the dye-sensitized solar cells. The overall conversion efficiency was observed a 4.80 % when 0.9 MW % Eu3+: MgAl2O4 was added to the TiO2 nanoparticle with an enhanced DSSC performance.

Compounding Methylene Blue with Selenium-decorated Graphene Quantum Dots to Improve Singlet Oxygen Production for Photodynamic Therapy Application.

Graphene quantum dots (GQDs) are known as suitable material to be applied in different fields such as photodynamic therapy (PDT). Herein, GQDs were synthesized by the pyrolysis method and then decorated with selenium (Se). Afterward, they were combined with methylene blue (MB) to increase singlet oxygen generation as well as to apply them more effectively in the PDT method. Furthermore, GQDs were investigated by transmission electron microscope (TEM), photoluminescence spectrum (PL), Fourier-transform infrared spectroscopy (FTIR), field emission scanning electron microscope (FESEM), reactive oxygen species (ROS) measurement, and cytotoxicity measurement. GQDs showed no dependence on the excitation wavelength. The result of ROS measurement proves that the combination of GQD-Se and MB increases singlet oxygen production. Moreover, afterglow measurement approved the beneficial effect of GQD-Se on even deep and near skin tumor treatment. Cytotoxicity measurements under dark conditions, cell viability, and the side effects on human cells were determined by (3-[4,5-dimethylthiazol-2-yl]-2,5 diphenyl tetrazolium bromide) (MTT) assay. Our findings show that under dark conditions, even high concentrations of nanoparticles have no significant effect on cell viability. These findings and the high biocompatibility of GQDs indicate the effective application of GQD-Se-MB in PDT.

Microwave-assisted green synthesis of silver nanoparticles using turnip root (Brassica rapa subsp. Rapa) extract and their antibacterial efficacy

Biosynthesised silver nanoparticles (AgNPs), especially those synthesised by plant extracts, are extensively utilised in the fields of pharmacy and medicine due to their ability to exhibit a wide range of biological functions. The current study is focused on the green synthesis of silver nanoparticles from various concentrated silver nitrate solutions using turnip root extract as a reducing and stabilising agent and to assess the in vitro antibacterial efficacy of these AgNPs. For the study, we employed microwave-assisted reduction to examine the impact of microwave energy on the resulting AgNPs in comparison to the conventional heating method. X-ray diffraction analysis revealed the crystalline nature of the as-prepared AgNPs, while field emission-scanning electron microscopy (FE-SEM) showed the majority of spherical-shaped AgNPs had an average grain size of 47.5 nm. Energy-dispersive x-ray spectroscopy (EDX) indicates the high weight percentage of the produced AgNPs than for extract residue, especially for the AgNPs that are prepared with microwave assistance. Fourier transform infrared spectroscopy (FTIR) was used to reveal the functional groups that are related to many phytochemical compounds, such as alkaloids, flavonoids, and terpenoids, which act as reducing and stabilizing agents. High zeta potential measures (−22.77 and −38.83 mv) approved the high stability of the synthesised AgNPs as higher zeta potentials typically correlate with greater stability. The antibacterial activity behaviour of the produced NPs against gram-positive (Staphylococcus aureus) and gram-negative (Escherichia coli) bacteria was significantly acceptable for both heating techniques, as observed from the measured inhibition zone.

Synergistic effects of graphene quantum dots nanocarriers and folic acid targeting agent on enhanced killing of breast cancer cells by tamoxifen

AbstractIn this study, a new targeted and controlled‐release drug delivery system based on graphene quantum dots (GQDs) was fabricated. The fluorescent GQDs were synthesized via an environmentally‐friendly chemical oxidation method, using graphene oxide (GO) as a precursor and hydrogen peroxide and ammonia solution as oxidants. Folic acid (FA), as a targeting agent, was bound to GQDs through strong amide covalent bindings, and tamoxifen (TMX), as a hydrophobic anticancer drug, was non‐covalently attached to the nanocarrier via π–π stacking bonds. The as‐prepared GQDs and TMX/FA‐GQDs were characterized using field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), atomic force microscopy (AFM), Fourier transform infrared spectroscopy (FTIR), UV/Vis spectroscopy (UV/Vis), and photoluminescence spectroscopy (PL). The resulting TMX/GQDs demonstrated pH‐sensitive release behaviour with an overall release of 85% and 58% at pH 5.5 and 7.4, respectively, after 120 h. Also, the MTT assay test performed on MCF‐7 cells presented negligible toxicity of the nanocarriers, even at high concentrations. At the same time, the targeted nanocarrier, TMX/FA‐GQDs, showed much more toxicity towards MCF‐7 cells than the non‐targeted one and free TMX.

Comprehensive characterization of unscientifically disposed municipal solid waste (MSW) in Kashmir Region, India.

Unscientific dumping of municipal solid waste (MSW) is a common practice in Kashmir. To have an environmentally friendly and sustainable waste management system, MSW was collected from nine study locations of this region. They were air-dried, then oven-dried at 105°C for 24h, segregated, and characterized for various components. The overall average organic waste was > 55%, plastic waste about 17%, inert material about 10%, paper 9%, and cloth waste 7%. The calorific value of paper and plastic wastes exhibited was 4910kcal/kg, while organic waste had a calorific value of 1980kcal/kg. The proximate analysis showed that the moisture content ranged from 16 to 29%, volatile matter ranged from 49 to 72%, ash content ranged from 0.03 to 5%, and fixed carbon ranged from 5 to 20%. In S7, the volatile matter content recorded the lowest value at 49.15%, while in S5, the volatile matter content was notably higher at 71.84%, indicating easier ignition. Further, elemental analysis revealed that the major elements in MSW were carbon and oxygen, 53% and 37%, respectively, with small traces of heavy metals with an average of 0.02% cadmium (Cd) and 0.006% lead (Pb). Moreover, field emission scanning electron microscopy (FESEM) micrographs provided confirmation that the majority of components in the MSW exhibited either partial or complete degradation, resulting in a rough surface texture. In addition, the presence of silica and other silicate groups was also detected. Fourier transform infrared spectroscopy (FT-IR) analysis revealed that the main functional groups were alcohol. In the X-ray diffraction (XRD) analysis, all the major mineral phases were detected between 20 and 30° 2θ, except for the peaks at 50-60° 2θ in S3 and S9 where catalysts such as zeolite Y and zeolite X were detected. Overall, the MSW had low moisture content but higher calorific value, making it a viable feedstock.

Fabrication and antimicrobial properties of novel meropenem-honey encapsulated chitosan nanoparticles against multiresistant and biofilm-forming Staphylococcus aureus as a new antimicrobial agent.

Honey exhibits a broad spectrum of antibacterial activity against Gram-positive and Gram-negative bacteria, including methicillin-resistant Staphylococcus aureus (MRSA) ones. Chitosan (Cs) is a mucoadhesive polymer that also has antibacterial properties. Special attention has been paid to the design of polymeric nanoparticles (NPs) as new nano drug delivery systems to overcome bacterial resistance and its problems. The aim of the present study is to synthesize Cs-meropenem NPs with/without honey as an antibiofilm and antibacterial agent to inhibit Staphylococcus aureus. This study synthesized meropenem and honey-loaded Cs nanogels and subsequently characterized them by Field Emission Scanning Electron Microscopy (FESEM), Fourier Transform Infrared Spectroscopy (FTIR), and DLS-zeta potential. Using the broth microdilution and crystal violet assays, the antibacterial and antibiofilm activity of meropenem and honey-loaded Cs nanogel, free meropenem, free honey, and free Cs NPs were investigated in vitro against MRSA strains. 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl-2H-tetrazolium bromide (MTT) was also used to test the cytotoxicity of several Cs-NPs compound against the HEK-293 regular cell line. The average size of meropenem and honey-Cs-NPs was reported to be 119.885nm, and encapsulation efficiency was 88.33 ± 0.97 with stability up to 60 days at 4°C. The NPs showed enhanced antibiofilm efficacy against S. aureus at sub-minimum inhibitory concentrations. Additionally, the cytotoxicity of meropenem and honey-encapsulated Cs against the HEK-293 normal cell line was insignificant. Our findings suggested that meropenem and honey-Cs-NPs might be potential antibacterial and antibiofilm materials.

Targeted Drug Delivery through the Synthesis of Magnetite Nanoparticle by Co-Precipitation Method and Creating a Silica Coating on it

Billions of dollars are spent annually in the world to treat and investigate problems caused by drug side effects. According to the estimation of health researchers, a huge part of people who take medicine suffer from complications caused by it. In this way, the necessity of using a targeted system in order to deliver medicine to the targeted place without damaging healthy tissues is felt more than before. In recent years, targeted drug delivery systems based on nanoparticles have received much attention. In the same direction, in this research, co-precipitation method was used to prepare magnetic nanoparticles using iron(|) and iron(||) oxides, and further, according to the synthesis steps of magnetite nanoparticles (MNPs) and the mechanism of formation and identification of magnetite nanoparticles ( Fe3O4) by examining the infrared pattern (FT-IR) obtained from Fe3O4 nanoparticles, the results of the magnetometric test (VSM) of Fe3O4 nanoparticles, X-ray diffraction pattern (XRD) of Fe3O4 nanoparticles, Field Emission Scanning Electron Microscope (FE-SEM) images obtained from Fe3O4 nanoparticles was discussed. After this stage, silica- coated iron nanoparticles (Fe3O4@SiO2) were prepared, and the infrared (FT-IR) pattern of Fe3O4@SiO2) was also investigated. It is worth mentioning that the mechanism of formation and identification of magnetic silica-coated iron nanoparticles (Fe3O4@SiO2) has been described in detail. Therefore, the obtained results indicate that the drug can be guided in a controlled and targeted manner by the magnetic field, and the results of the FE-SEM images show that the obtained product has a spherical morphology and the particle size distribution was less than 100 nm. Therefore, spherical shape and the symmetry of these particles can be helpful for their movement in the liquid mediu.

Mechanical and tribological properties of hybrid and monolithic reinforced hypoeutectic Al‐Si matrix composites

This study investigates the combined influence of Si element and reinforcing particles on the hardness and wear performance of aluminum matrix composites. The composites in focus include Fe‐based metallic glass (FMG) monolithic reinforced and FMG/SiC hybrid reinforced Al‐5 wt% Si matrix composites, fabricated through spark plasma sintering (SPS). A comprehensive investigation was carried out, encompassing the analysis of microstructural attributes and the examination of worn surfaces through field emission scanning electron microscopy. Additionally, the study scrutinized two pivotal factors—hardness and density—recognizing their pivotal roles in determining the tribological performance of these composites. The experimental findings demonstrated the presence of an oxide protective layer on the worn surfaces of all specimens. Although, FMG/SiC hybrid reinforced Al‐5 wt% Si matrix composite possessed the highest hardness value, the best tribological performance was observed in Si‐bearing monolithic reinforced composite. The addition of Si to the matrix of monolithic reinforced composite facilitated improved densification behavior and enhanced the distribution of reinforcing particles, resulting in a more stable and protective oxide layer in this specific sample. Furthermore, the study identified a transition in the operative wear mechanisms from delamination to mild abrasion and adhesion with the inclusion of Si element.This article is protected by copyright. All rights reserved.

Experimental analysis and numerical simulation of biomass pyrolysis

AbstractFinding alternatives to fossil fuels is extremely important for economic and environmental considerations. Biomass pyrolysis stands out as an efficient method for generating fuels and chemical intermediates. This study explored the influence of wood particle size (ranging from 1 to 3 cm) and pyrolysis temperature (ranging from about 300 to 480 °C) on the process. Characterization of wood residues utilized energy-dispersive X-ray (EDX) and field emission scanning electron microscopy (FE-SEM) to comprehend surface morphology and resultant biochar structure. Results revealed a significant temperature-dependent impact on pyrolysis product concentrations. Biomass composition analysis indicates lignin, hemicellulose, extractive contents, and cellulose percentages at 11.23%, 39%, 2.15%, and 47.62% mass/mass, respectively. Reduction in particle size to less than 2 mm enhances heat transfer, elevating overall bio-oil production. Major bio-oil components comprise phenolics, acids, alcohols, aldehydes, and ketones. Optimal conditions are identified at a wood particle size of 1 cm and a heating temperature of 480 °C. For every 1.0 kg of wood biomass residues, bio-oil, syngas, and biochar yields are 0.38 kg, 0.22 kg, and 0.4 kg, respectively. Notably, the agreement between Aspen Plus simulation and experimental findings underscored the robustness of the study.